950 & 951 Series: 60 degree Exit - Snap

FEATURES:

• Available in 4 industry sizes/positions (9, 15, 25, 37).
• 4-40 mating screws supplied with backshell.
• Snap together design reduces assembly cost.
• Available in metalized plastic and plastic.
• Mechanical Strain Relief provides secure cable retention.
• Hood is the same thickness as connector.
• 60° exit promotes stacking & is suitable in extremely narrow spaces.

MATERIALS:

• Metalized Plastic: ABS/PC, UL 94V-O
• Plating: Nickel over copper
• Plastic: Polyamide - UL 94V-0
• Hardware: Steel, nickel plating

952 Series: Straight / Top Entry Backshell

FEATURES:

• Available in 4 industry sizes/positions (9, 15, 25,37).
• Straight / Top Entry.
• 4-40 Thumbscrews supplied with backshell.
• More robust design for those areas that need it.
• 360° shielding with mechanical strain relief.
• 2 Piece metalized plastic compression insert supplied (3 different sizes).

MATERIALS:

• Die Cast: Light weight Zinc.
• Plating: Nickel over Copper.
• Hardware: Steel, nickel plating.
• Operating Temp: -30°C to +90°C.
• Shield Effectiveness: >40dB between 30MHz & 1GHz.
• Perimeter sealing dips for secure assembly.

953 Series: 35 degree Entry

FEATURES:

• Available in 4 industry sizes/positions (9, 15, 25,37).
• 4-40 Thumbscrews supplied with backshell.
• (9 position only comes with 1 Thumbscrew)
• More robust design for those areas that need it.
• Fully tapped assembly holes allow easy assembly keeping manufacturing cost down
• 360° shielding with mechanical strain relief.
• 2 Piece metalized plastic compression insert supplied (3 different sizes).

MATERIALS:

• Die Cast: Light weight Zinc.
• Plating: Nickel over Copper.
• Hardware: Steel, nickel plating.
• Operating Temp: -30°C to +90°C.
• Shield Effectiveness: >40dB between 30MHz & 1GHz.
• Perimeter sealing dips for secure assembly.

954 Series: 45 degree Exit - Ethernet Backshell

FEATURES:

• Available in 4 industry sizes/positions (9, 15, 25,37).
• Die Cast for excellent shielding.
• Easy assembly reduces manufacturing cost.
• 2 pc. grommet with various I.D.s included to enhance shielding & provide positive retention.
• Slide locks and posts must be purchased separately.

MATERIALS:

• Die Cast: Zinc Alloy Ingot.
• Plating: Nickel over Copper.
• Operating Temp: -30°C to +90°C.

955 Series: Quick Lock - 180°/30° Exit

FEATURES:

• Available in 4 industry sizes/positions (9, 15, 25, 37).
• New locking system allows single hand removal / mating with secure latching.
• Ideal for high vibration environments.
• 9, 15 position allows 2-way cable exit.
• 25, 37 position allows 3-way cable exit
• 2 pc. grommet with various I.D.s included.
• Requires special mating hardware (purchased separately).

MATERIALS:

• Die Cast: Zinc Alloy
• Plating: Nickel over copper or black die cast
• Metalized Plastic: High temperature - U.L. 94V-O
• Plating: Nickel over copper
• Plastic: High temperature - U.L. 94V-O, Black

956 Series: 180 degree Exit - Snap

FEATURES:

• Available in 3 industry sizes/positions (9, 15, 25).
• Snap together design allows low cost assembly.
• 4-40 Mating screw supplied with backshell.
• Available in metalized plastic and plastic.
• Quick assembly strain relief allows positive retention.

MATERIALS:

• Metalized Plastic: ABS/PC, UL 94V-O
• Plating: Nickel over copper
• Plastic: Polyamide - UL 94V-0
• Hardware: Steel, nickel plating

957 Series: Gender Changer Backshell

FEATURES:

• Available in 4 industry sizes/positions (9-9, 15-15, 25-25, 9-25).
• Snap together design allows low cost assembly.
• 4-40 Mating screw for male connectors supplied
  with backshell.
• 4-40 female coupling for female connectors sold separately.
• Internal cavity designed for PCB.

MATERIALS:

• Metalized Plastic: ABS - U.L. 94HB
• Plating: Nickel over copper
• Plastic: ABS - U.L. 94HB

958 Series: Flat Ribbon Top Entry Backshell

FEATURES:

• Available in 3 industry sizes/positions (9, 15, 25).
• #4-40 Female screwlock supplied to hold connector in backshell.
• Available in Black ABS Plastic
• Easy "Slip-on" assembly reduces manufacturing cost.
• Compatible with most industry standard IDC Ribbon D-Sub Connectors.

MATERIALS:

• Shell: Plastic, ABS - Black
• Screwlocks: Brass, Nickel Plated

993 Series: 45 Degree Entry Backshell

FEATURES:

• Available in 2 industry sizes/positions (9, 25).
• 4-40 mating hardware supplied with backshell.
• Perimeter sealing lips for secure sealing.
• Available in metalized plastic and plastic.
• Metalized plastic provides up to 60 dB shielding.
• Easy assembly reduces manufacturing cost.
• Strain Relief design ensures secure fit no matter what cable diameter is used.

MATERIALS:

• Metalized Plastic: High temperature - UL 94H-B
• Plating: Chrome
• Plastic: High temperature plastic - UL 94H-B (Grey)
• Hardware: Steel, nickel plating

994 Series: Ethernet Backshells

FEATURES:

• Available in 3 industry sizes/positions (9, 15, 25).
• Available in die cast for over 70 dB shielding..
• Easy assembly reduces manufacturing cost.
• Non-conductive grommet/strain relief available to enhance shielding and provide proper strain relief - Must be purchased separately (Part Number: 162-000-925R000)
• Slide locks and posts must be purchased separately.

MATERIALS:

• Die Cast: Zinc Alloy Ingot
• Plating: Nickel over copper
• Hardware: Steel, nickel plating